Tel: +86-18957322071




Zhejiang Guoyao Aluminium Co., Ltd.

Address: Yuantong Industrial Zone Haiyan County in Zhejiang China




Aluminum type and application range

1050 Extruded coils for food, chemical and brewing industries, various hoses, tobacco pollen

1060 requirements of high corrosion resistance and formability of the occasion, but the strength is not high, chemical equipment is its typical use

1100 for processing need to have good formability and high corrosion resistance but does not require high strength parts parts, such as chemical products, food industry and storage containers, sheet metal processing parts, deep drawing or spinning concave vessels, Welding parts, heat exchangers, printing plates, nameplates, reflective appliances

1145 Packaging and adiabatic aluminum foil, heat exchangers

1199 electrolytic capacitor foil, optical reflective film

1350 wire, conductive strand, bus, transformer strip

2011 screws and machined products with good cutting performance

2014 for applications where high strength and hardness (including high temperatures) are required. Aircraft Heavy Duty, Forgings, Heavy Plate and Extruded Materials, Wheels and Structural Components, Multistage Rocket First Stage Fuel Tank and Spacecraft Parts, Truck Frame and Suspension System Parts

2017 is the first to obtain industrial applications 2XXX alloy, the scope of application is narrow, mainly for rivets, general mechanical parts, structural and transport structure, propeller and accessories

2024 aircraft structure, rivets, missile components, truck wheels, propeller components and other structural parts

2036 car body sheet metal parts

Aerospace structural components and weapon structural parts

2124 Aerospace structure

2218 aircraft engine and diesel engine piston, aircraft engine cylinder head, jet engine impeller and compressor ring

2219 space rocket welding oxidizer tank, supersonic aircraft skin and structural parts, the working temperature of -270 to 300 degrees Celsius. Good weldability, high fracture toughness, T8 state has a high resistance to stress corrosion cracking ability

2319 alloy welding electrode and filled solder

2618 Die forging and free forging. Piston and Aero Engine Parts

2A01 Operating temperature less than or equal to 100 degrees Celsius structural rivets

2A02 Operating temperature of 200 ~ 300 degrees Celsius Turbine jet engine axial compressor blades

2A06 Operating temperature 150 ~ 250 degrees Celsius aircraft structure and operating temperature 125 ~ 250 degrees Celsius aircraft structure rivets

2A10 strength higher than 2A01 alloy, the manufacture of operating temperature is less than or equal to 100 degrees Celsius aircraft structure rivets

2A11 aircraft medium strength structural parts, propeller blades, transport tools and building structural parts. Aircraft with medium strength bolts and rivets

2A12 aircraft skin, frame, wing ribs, spars, rivets, construction and transportation structure

2A14 The shape of the complex free forging and die forging

2A16 Aerospace parts with operating temperature of 250 to 300 degrees Celsius, welded containers and airtight cockpits working at room temperature and at high temperatures

2A17 Operating temperature 225 ~ 250 ° C under the aircraft parts

2A50 shape of the complex medium strength parts

2A60 aircraft engine compressor wheel, guide wheel, fan, impeller and so on

2A70 aircraft skin, aircraft engine piston, guide wheel, roulette and so on

2A80 Aero Engines Compressor blades, impellers, pistons, rings and other parts with high operating temperature

2A90 Aero Engine Piston

3003 for processing need to have good forming performance, high corrosion resistance and good solderability parts parts, or both require these properties and the need to have a higher strength than 1XXX alloy work, such as kitchenware, food and chemical products With the storage device, the transport of liquid products in the tank, cans, sheet metal processing of various pressure vessels and pipes

3004 aluminum cans, require more than 3003 alloy strength parts, chemical products production and storage devices, sheet metal processing parts, construction and processing parts, construction tools, various lamp parts

3105 room partition, baffle, activities, board, gutters and down pipes, sheet metal forming parts, caps, stoppers, etc.

3A21 aircraft fuel tank, oil pipeline, rivet wire, etc .; building materials and food and other industrial equipment, etc.

5005 and 3003 alloy similar, with moderate strength and good corrosion resistance. Used as a conductor, cooker, dashboard, shell and architectural trim. The anodic oxide film is brighter than the oxide film on the 3003 alloy and is consistent with the tone of the 6063 alloy

5050 sheet can be used as a liner for refrigerators and refrigerators, automotive trachea, tubing and agricultural irrigation pipes; also can be processed thick plate, pipe, bar, profiled and wire

5052 This alloy has good forming processability, corrosion resistance, can be candle, fatigue strength and moderate static strength, used in the manufacture of aircraft fuel tanks, tubing, and traffic vehicles, ship's sheet metal parts, instruments, street lamps and rivets , Metal products and so on

5056 magnesium alloy and cable sheath rivets, zippers, nails, etc .; aluminum wire is widely used in processing agricultural insects cover, and the need for high corrosion resistance of other occasions

5083 For applications where high corrosion resistance, good weldability and moderate strength are required, such as warships, automotive and aircraft plate welds; pressure vessels, refrigeration units, towers, drilling equipment, traffic Transport equipment, missile components, armor and so on

5086 For applications where high corrosion resistance, good weldability and moderate strength are required, such as ships, automobiles, aircraft, cryogenic equipment, television towers, drilling rigs, transport equipment, missile parts and decks, etc.

5154 Welded structure, storage tank, pressure vessel, ship structure and offshore facilities, transport tank

5182 sheet for processing cans, car body panels, control panels, reinforcements, brackets and other parts

5252 is used to make decorative parts with higher strength, such as cars and other decorative parts. After anodic oxidation with bright and transparent oxide film

524 Hydrogen peroxide and other chemical products containers

5356 welding magnesium content of more than 3% of the aluminum - magnesium alloy electrode and wire

5454 welded structure, pressure vessel, marine facility piping

5456 armor plate, high strength welding structure, storage tank, pressure vessel, ship material

5457 Decorative pieces of polished and anodized cars and other equipment

5652 Hydrogen peroxide and other chemical products Storage containers

5657 polished with anodized parts of automotive and other equipment, but in any case it must be ensured that the material has fine grain organization

5A02 aircraft fuel tank and pipe, wire, rivets, ship structure

5A03 medium strength welding structure, cold stamping parts, welding containers, welding wire, can be used to replace 5A02 alloy

5A05 welded structural parts, aircraft skin skeleton

5A06 welding structure, cold forging parts, welding capacity of the container parts, aircraft skin bone parts

Industrial aluminum profiles

Industrial aluminum profiles

5A12 welded structural parts, bulletproof deck

6005 Extruded profiles and tubing for structural parts requiring a strength greater than 6063 alloy, such as ladder, tv antenna, etc.

6009 car body plate

6010 sheet: car body

6061 requires a certain strength, weldability and high corrosion resistance of various industrial structures, such as the manufacture of trucks, tower buildings, ships, trams, furniture, machinery parts, precision machining, etc., Plate

6063 Industrial profiles, construction profiles, irrigation pipes and extruded materials for vehicles, benches, furniture, fences, etc.

Insulation material for forgings and welded structures

6070 Heavy-duty welding structure and extrusion materials and pipes for the automotive industry

6101 high strength bar for buses, electrical conductors and cooling equipment

6151 for forging crankshaft parts, machine parts and the production of rolling ring, both for the requirements of a good forging performance, high strength, but also have good resistance to corrosion

High - strength conductive bar and wire

6205 Heavy Plate, Pedal and High Impact Extrusion

6262 requires high resistance to corrosion and corrosion of the 2011 and 2017 alloy

6351 Extrusion of structural parts of vehicles, water, oil and other pipelines

6463 Buildings and various appliance profiles, as well as anodized with a bright surface after the car decoration

6A02 aircraft engine parts, the shape of the complex forging and die forging

7005 Extruded materials for the manufacture of welded structures that have high strength and high fracture toughness, such as trusses, rods and containers for transport vehicles; large heat exchangers, and can not be welded after welding And can also be used to make sports equipment such as tennis racquet and baseball

7039 Frozen containers, cryogenic equipment and storage tanks, fire pressure equipment, military equipment, armor plates, missile devices

7049 for forging static strength and 7079-T6 alloy is the same and requires a high resistance to corrosion cracking cracked parts, such as aircraft and missile parts - landing gear hydraulic cylinder and extrusion parts of the fatigue performance roughly 7075- T6 alloy is equal, while toughness is slightly higher

7050 aircraft structural parts with plate, extrusion parts, free forging and die forging. The requirements for the manufacture of such parts are: resistance to peeling corrosion, stress corrosion cracking resistance, fracture toughness and fatigue resistance are high

7072 air conditioner aluminum foil and special thin strip; 2219,3003,3004,5050,5052,5154,6061,7075,7475,7178 alloy sheet and pipe coating

7075 for the manufacture of aircraft structure and futures he requires high strength, high corrosion resistance of high-stress structural parts, mold manufacturing

7175 High strength structural for forged aircraft. T736 material has a good overall performance, namely, strength, anti-peeling corrosion and stress corrosion cracking cracking performance, fracture toughness, fatigue strength are high

7178 Components for the manufacture of aerospace applications with high compressive yield strength

7475 body with aluminum and aluminum sheet, wing skeleton, beams and so on. Other parts that have both high strength and high fracture toughness

7A04 aircraft skins, screws, and force components such as girder beams, frame, ribs, landing gear, etc.

Contact Us

Address:Yuantong Industrial Zone, Hanyan city, Zhejiang Province, China



Mobile Phone:86-18957322071